BARTSHARP 187 Dual Action Gravity Feed Airbrush
We have taken all that we have learned from recent years and teamed up with a top manufacturer, highly endorsed by international airbrush artist Chuck Bauman, to create our own brand and extensive range of airbrushes.
We have insisted on higher tolerances and are proud to say that our range of BARTSHARP Airbrushes are of a higher quality and provide better performance tha the VEDA airbrush range.
The BARTSHARP 187 Airbrush is a traditonal pen style with dual action and gravity feed .
Dual action: push down on the trigger for air and pull back, on the trigger, to release paint.
It comes fitted with a quality 0.3mm needle, nozzle and nozzle cap. This set up is for medium detail spraying and will allow you to create a hair line spray width up to approximately 28mm.
It can also be fitted with a 0.2mm needle/nozzle set for creation of finer lines or for more detailed work.
Alternatively it can also be fitted with a 0.5mm neelde/nozzle set which is ideally suited to those wishing to spray slightly thicker mediums or wishing to lay down base coats, top coats or washes. This larger size set up optimises a smoother paint flow and will help to prevent clogging and splatter associated with the use of smaller needle and nozzle.
The BARTSHARP Airbrush 187 incorporates a needle adjust screw on the rear handle which allows you to set the distance which the needle can travel back. This allows you to repeatedly create lines of the same thickness.
This model of airbrush differs from the BARTSHARP Airbrush 186 as it does not have a Micro Air Control Valve situated just under the front of the airbrush. This added feature, on the 186 model, gives you fingertip tip control over the volume of air passing over the needle and nozzle. This feature is particularly useful for creating paint effects, such as weathering, or simply for controlling your airbrush whilst creating fine grain detail.
The BARTSHARP Airbrush 187 comes with three fully interchangeable cups:
2cc, 5cc (with push fit lid) & 13cc (with push fit lid)
The air inlet is 1/8BSP which is the most regularly used size for airbrushes and air hoses alike. (BSP means British Standard Pipe and describes the thread pitch whilst 1/8 is equal to 9.35mm (approx)
As you would expect we have all of the spare that you will need including:
We have a limited number of these particular airbrushes.