Welcome To BARTSHARP Airbrush® Please Contact Us If You Need Any Advice or Information About Selecting The Equipment Which Is Right For Your Particular Needs

BARTSHARP Airbrush 133 Dual Action Siphon Feed Airbrush

BARTSHARP Airbrush 133 Dual Action Siphon Feed Airbrush

Availability: In stock

  • Free UK Shipping

  • Dual Action Side Feed Siphon

  • Fitted With 0.3mm Needle / Nozzle

  • Can Also Be Fitted With 0.2mm or 0.5mm Needle / Nozzle

  • 22cc Side Feed Glass Jar

  • Full Range Of Spares In Stock

  • One Year Warranty



BARTSHARP 133 Dual Action Siphon Feed Airbrush


We have taken all that we have learned from recent years and teamed up with a top manufacturer, highly endorsed by international airbrush artist Chuck Bauman, to create our own brand and extensive range of airbrushes.

We have insisted on higher tolerances and are proud to say that our range of BARTSHARP Airbrushes are of a higher quality and provide better performance tha the VEDA airbrush range.


The BARTSHARP Airbrush133 is a traditonal pen style dual action side siphon feed airbrush. The side feed paint jar has a capacity of 22cc which makes it ideal for laying down base coats, washes or top coats.

Dual action: push down on the trigger for air and pull back, on the trigger, to release paint.

It comes fitted with a quality 0.3mm needle, nozzle and nozzle cap. This set up is for medium detail spraying and will allow you to create a hair line spray width up to approximately 28mm.

It can also be fitted with a 0.5mm needle/nozzle set for creation of wider lines or for slightly less detailed work and spraying slightly thicker mediums or to lay down base coats, top coats or washes

Alternatively it can also be fitted with a 0.2mm neelde/nozzle set which is ideally suited to those wanting to achieve finer detail. 

The BARTSHARP Airbrush 133 incorporates a needle adjust screw on the rear handle which allows you to set the distance which the needle can travel back. This allows you to repeatedly create lines of the same thickness.


The air inlet is 1/8BSP which is the most regularly used size for airbrushes and air hoses alike. (BSP means British Standard Pipe and describes the thread pitch whilst 1/8 is equal to 9.35mm (approx)


As you would expect we have all of the spare that you will need including:

0.2mm needles, nozzles & nozzle caps

0.3mm needles, nozzles & nozzle caps

0.5mm needles, nozzles & nozzle caps

Replacement o ring sets with 1 x Teflon Needle Packing Bush

Spare 22cc Side Feed Glass Jars

Spare 22cc Glass Storage Jars


We have a limited number of these particular airbrushes.




Customer Reviews 1 item(s)

bartsharp, your products are awesome
Managed to finally get to test out the bartsharp airbrush 133 Review by Darren Linacre / (Posted on 03/12/2018)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.